DXFFREEFloral Wreath
89 downloads · 6 formats
SVGDXFCDR
Free download
Choose your format
0downloads
A modern geometric wall art piece built from a radial lattice that reads as depth from across the room.
What’s included
- A modern geometric wall art piece built from a radial lattice that reads as depth from across the room.
- The file is drawn at 350 × 350 mm in birch plywood at 3 mm, with 45 closed paths and roughly 6,464 mm of total cut length. Cut and score geometry are on separate layers, units are millimetres and the origin sits at the bottom-left corner of the bounding box.
- We test every upload on a 60 W CO2 machine and a 20 W diode before publishing. In 3 mm birch plywood the file cuts cleanly with a 0.15 mm kerf allowance; measure a 50 mm test square on your own machine and adjust compensation before committing a full sheet.
- Mask both faces with transfer tape before cutting and the smoke stays on the tape. Peel while the part is still warm and the adhesive lifts cleanly without pulling fibres.
- Download it in 6 formats — SVG, DXF, CDR, PDF, AI, EPS — all generated from the same master geometry, so switching format never changes the part. Released under CC BY 4.0: cut it, sell it, adapt it, just keep the credit and don't redistribute the files themselves.
Cut these next
Related designs
About This Design
A modern geometric wall art piece built from a radial lattice that reads as depth from across the room.
The file is drawn at 350 × 350 mm in birch plywood at 3 mm, with 45 closed paths and roughly 6,464 mm of total cut length. Cut and score geometry are on separate layers, units are millimetres and the origin sits at the bottom-left corner of the bounding box.
We test every upload on a 60 W CO2 machine and a 20 W diode before publishing. In 3 mm birch plywood the file cuts cleanly with a 0.15 mm kerf allowance; measure a 50 mm test square on your own machine and adjust compensation before committing a full sheet.
Mask both faces with transfer tape before cutting and the smoke stays on the tape. Peel while the part is still warm and the adhesive lifts cleanly without pulling fibres.
Download it in 6 formats — SVG, DXF, CDR, PDF, AI, EPS — all generated from the same master geometry, so switching format never changes the part. Released under CC BY 4.0: cut it, sell it, adapt it, just keep the credit and don't redistribute the files themselves.
This downloadable design is supplied in 6 formats. Choose the file that works with your compatible vector editing or CAD software, then inspect the geometry, drawing units, scale and closed paths before cutting.
Design & File Information
| Design name | Geometric Wall Art |
|---|---|
| Product ID | 2005 |
| Category | Laser Cut |
| Product type | Digital vector design |
| Available formats | SVG, DXF, CDR, PDF, AI, EPS |
| Number of files | 6 |
| Total file size | 175 KB |
| Price | Free |
| Total downloads | 23 |
| Delivery | Digital download |
| Physical product | Not included |
Sizes are calculated from the published originals and rounded for display. Drawing units and fabrication dimensions have not been independently verified.
Available File Formats
SVG — Scalable Vector Graphics
SVG is the working format for most desktop laser cutters. Our files use a millimetre user space with a matching viewBox, hairline strokes and no fills, which means LightBurn and LaserGRBL import them at the correct physical size on the first try.
DXF — AutoCAD DXF
DXF is the safest choice when a file has to travel between CAD software and a machine controller. Every DXF Design Point DXF is exported as R2000 ASCII with millimetre units, closed polylines and no stray duplicates, so LightBurn, RDWorks, SheetCam, Fusion 360 and AutoCAD all read the same geometry.
CDR — CorelDRAW
A large share of the sign and engraving trade still drives machines straight out of CorelDRAW. This download bundles the design as a clean DXF plus an SVG and a plain-text import note, which CorelDRAW opens natively at the correct scale.
PDF — Print-ready PDF
Every PDF is a single true-scale sheet with the outline drawn as vector strokes — no rasterisation, no 'fit to page' surprises. Print at 100 % and you have a paper template you can tape to the material or hand to a client for sign-off.
AI — Adobe Illustrator
The AI download is an Illustrator-compatible EPS: fully editable paths, named layers and no embedded rasters. Open it, ungroup once and every cut line is selectable.
EPS — Encapsulated PostScript
EPS remains the most widely accepted vector exchange format in the sign trade. Ours are Level 2 PostScript with a tight bounding box, flat colours and stroke-only geometry.
Software Compatibility
Depending on the format and version, these files may be opened or imported using compatible applications such as LightBurn, LaserGRBL, Inkscape, Illustrator, Cricut Design Space, xTool Creative Space, RDWorks, SheetCam. Actual compatibility depends on the application version, import settings and file contents.
How to Download and Use
- Select the file format you need.
- Click the matching download button.
- Save the file to your device.
- Open or import it in compatible software.
- Check drawing units, dimensions, scale, paths and geometry.
- Prepare machine settings and run a test piece before full production.
License & Usage
CC BY 4.0. You may cut and sell physical objects made from these files. You may modify the geometry for your material and machine.
Do not redistribute or resell the original digital files as standalone downloads. See the full license terms.
Frequently Asked Questions
What material thickness is “Geometric Wall Art” drawn for?
3 mm birch plywood. Slots and joints are cut to that dimension with the clearance noted in the description. If your stock differs, offset the slot geometry by the difference rather than scaling the whole file — scaling changes the outer dimensions too.
Which file format should I download?
For LightBurn, LaserGRBL or xTool Creative Space take the SVG. For RDWorks, SheetCam, Fusion 360 or any CAD package take the DXF. CorelDRAW shops can use the CDR bundle, and the PDF prints at true scale for templates and quotes.
Can I sell what I make from this file?
Yes. The CC BY 4.0 licence covers commercial use of physical objects without any volume limit. Credit “DXF Design Point” in your listing or on the packaging. What you may not do is resell, bundle or redistribute the digital files themselves.
Which file formats are included?
Each design is generated from one master geometry and exported as SVG, DXF, CDR, PDF, AI and EPS, so switching format never changes the part.
Explore More Designs
Browse more Laser Cut, free CNC design files or search the full catalog.
Loading reviews…